How to Clean White Trainers: A Step-by-Step Guide
A practical UK guide to cleaning white trainers: what you need, the order to do it in, how to dry them without yellowing, and fixes for stubborn marks.

In this article
The short answer
Most white trainers come up clean with a soft brush, a little mild soap and cold water. The order matters more than the kit: brush off dry dirt first, wash in small sections, rinse every trace of soap away, then dry slowly at room temperature.
A proper clean takes roughly 15 to 30 minutes of hands-on work plus 12 to 24 hours of drying time. The two things that ruin white trainers are too much water on leather and leftover soap drying in sunlight — both are easy to avoid once you know about them.
Match the method to what your trainers are made of
White isn't a material, it's a colour, and the same technique that rescues a canvas plimsoll will wreck a suede pair. Work out what you're dealing with before you fill a bowl.
Find your upper, then use the method in the middle column and keep clear of the last one.
| Upper material | Can it get wet? | Best approach | Keep it away from |
|---|---|---|---|
| Canvas | Yes, fully washable | Soft brush with diluted mild soap, then rinse until the water runs clear | Soap residue left to dry in |
| Mesh and knit | Yes, but sparingly | Damp cloth and a soft brush, dabbing rather than scrubbing | Stiff brushes that pull threads and cause pilling |
| Leather and synthetic leather | Wipe only | Damp cloth with a trace of mild soap, wiped dry straight after | Soaking, machine washing, harsh brushes |
| Suede and nubuck | No — never soak | Dry brush plus a suede eraser or a cleaner made for suede | Water, soap and scrubbing |
| Rubber and foam midsoles | Yes | Old toothbrush with soapy water; a melamine sponge for scuffs | Abrasive pads that dull the finish |
What you need before you start
Nothing here is specialist. If you have a basin, a cloth and a brush you can start now; the rest just makes the job quicker.
- Soft-bristled brush
- An old toothbrush for the midsole, stitching and eyelets; a slightly firmer brush for canvas uppers
- Two or three cloths
- One for washing, one clean damp one for rinsing and blotting — microfibre works well
- Mild soap
- Washing-up liquid, gentle laundry detergent or a dedicated shoe cleaner, diluted in lukewarm water
- Bicarbonate of soda
- For a paste on scuffs, and to lift odour from insoles
- White vinegar
- Diluted, for stubborn marks and light yellowing
- Plain paper towels
- Unprinted, for stuffing the toe box while the shoes dry
- Melamine sponge
- Optional, for rubber midsoles only — test on a hidden patch first
- Time
- 15–30 minutes of work, then 12–24 hours of air drying
Step by step: washing white trainers
Brush off the dry dirt first
Take the shoes outside or hold them over a bin and brush off loose mud, dust and grit with a dry brush. If mud is caked on, let it dry completely first — wet mud smears into the fabric and drives the dirt deeper.
Remove laces and insoles
Both come out for cleaning, and taking them out lets you clean the tongue and the gap around it properly. Set them aside; they get their own treatment.
Mix a mild solution
A couple of drops of washing-up liquid or a little gentle detergent in a bowl of lukewarm water. More soap does not mean more cleaning power — it just means more residue to rinse out later.
Work in small sections, top down
Dip the brush, shake off the excess and scrub in small circles, one panel at a time. Work from the top of the shoe downwards so dirty water doesn't run back over clean fabric. Don't flood the upper; the brush should be damp, not dripping.
Rinse with a clean damp cloth
Wipe each section with a clean cloth rinsed in plain water, folding it to a fresh face as it picks up dirt. Rinse the cloth often. Repeat until no soapy film is left — this step is what prevents yellowing later.
Clean the midsole and outsole separately
The rubber edge collects scuffs and grey marks that a soft brush won't shift. Use the toothbrush with soapy water, then a melamine sponge lightly on stubborn scuffs, and wipe clean.
Deal with anything left before it dries
Check the shoes in good light while they're still damp. Any remaining marks are far easier to treat now than after drying. Treat them, then rinse the area again.
Laces, insoles and the inside
These are the parts that make a clean pair of trainers still smell like old trainers.
- Laces: soak them in warm water with a little detergent for 15–20 minutes, rub the dirty sections between your fingers or with a brush, then rinse until the water runs clear. Wash white laces on their own — a grey sock in the same bowl undoes the work.
- Insoles: scrub the top surface lightly with a soft brush and soapy water, then rinse and pat dry with a towel. Don't soak them through; the foam holds water and takes days to dry. A dusting of bicarbonate of soda left on for a few hours lifts stale smells.
- The inside: wipe around the lining with a damp cloth, and pay attention to the heel and tongue where sweat collects. Leave the shoes open and airy overnight rather than shutting them in a cupboard.
Drying: how to avoid yellow patches
Stuff the toe box with plain paper
Loosely crumpled paper towels or plain white paper hold the shape and draw moisture out of the lining. Skip newspaper and anything printed — the ink can transfer to damp white fabric.
Reshape and leave them in the open
Pull the tongue up and press the upper back into shape. Stand them somewhere with moving air at normal room temperature, ideally near an open window on a mild day.
Swap the paper once it feels damp
Change the stuffing after a couple of hours and again before bed. Fresh paper speeds up drying and stops the inside going musty.
Wait until they're bone dry
Damp trainers crease badly the first time you wear them, and a damp insole is where smells start. Give them a full day if you can.
Stubborn marks and what shifts them
Work through these from the mildest option upwards, and rinse after every attempt so you can see what's actually left.
Treat marks while they're fresh where you can, and always finish by rinsing the area and drying it in the shade.
| Mark | Try first | If that fails |
|---|---|---|
| Mud | Let it dry fully, then brush it off before any water touches it | Damp cloth with a little mild soap, then rinse |
| Grass stains | A cloth dampened with diluted white vinegar, dabbed on | Bicarbonate of soda paste left for ten minutes, then rinsed |
| Scuffs on the midsole | Melamine sponge, used lightly | Toothbrush with soapy water and a little bicarbonate |
| Oil and grease | Blot, then work in bicarbonate of soda or cornflour to absorb it and brush off | A drop of washing-up liquid worked in with a brush, then rinse well |
| Ink | Dab, don't rub, with a cloth and a small amount of rubbing alcohol | Repeat in short bursts rather than flooding the area |
| Yellowing on the upper | Rewash and rinse far more thoroughly, then dry in shade | A very dilute vinegar wipe, rinse, dry in shade |
What commonly goes wrong
Almost every failed white-trainer clean comes down to one of these:
- Too much soap, not enough rinsing. Leftover detergent dries to a yellow or grey film that looks worse than the original dirt. Rinse again, even when the water looks clear.
- Soaking leather or suede. Both should be cleaned damp rather than wet. Water marks on suede are very hard to remove once they've dried in.
- A brush that's too stiff on knit. It catches loops, pulls threads and leaves a fuzzy, bobbly surface that no amount of cleaning will fix.
- Household bleach. It can yellow synthetic fibres, weaken canvas and burn leather. Gentler options work just as well.
- Drying on a radiator or in the sun. Heat warps the shoe and sun plus detergent residue is the classic yellowing combination.
- Wearing them while still damp. The upper stretches and creases, and the insoles start to smell within a day or two.
Keeping them white between cleans
A two-minute habit saves the big job.
- Wipe the midsole and toe box with a damp cloth after a muddy walk, before the dirt sets.
- Keep a couple of pairs in rotation so each one gets a full day to air out and dry between wears.
- Loosen the laces before you take them off; forcing a foot in and out creases the heel and cracks the material over time.
- Store them somewhere dry and open to the air rather than in a sealed bag at the back of a cupboard, which traps damp and encourages mildew.
- If you use a protective spray, follow the tin's instructions and apply it to clean, dry shoes, not over dirt.
Frequently asked questions
Can I put white trainers in the washing machine?
Sometimes, but only canvas or mesh pairs without leather trim, on a cool gentle cycle, inside a pillowcase or laundry bag with the laces removed. The heat and tumbling can warp the shape, soften the glue and dull the finish. It is never right for leather, suede or shoes with glued-on decoration.
Why do my white trainers go yellow after washing?
Usually leftover detergent. Soap that hasn't been rinsed out reacts with sunlight as it dries and leaves a yellow tinge, most often on canvas and mesh. Rewash with plain water, rinse until it runs clear and dry in a shaded, airy spot.
How often should I clean white trainers?
Wipe them over after each wear if you can, and do a full wash once dirt starts building on the toe box, the midsole edge or the stitching — for everyday pairs that's usually every few weeks. Leaving dirt to grind in means harder scrubbing and more wear on the fabric.
Can I use bleach to whiten trainers?
No. Household bleach can yellow synthetic fibres, weaken canvas and damage leather. Bicarbonate of soda paste, diluted white vinegar and oxygen-based cleaners are far gentler on white uppers, and vinegar should still be patch tested first.
Is a melamine sponge safe on trainers?
On rubber midsoles and hard soles, yes, used lightly. Melamine is mildly abrasive and can dull painted or coated finishes, so keep it off leather, suede and printed panels and try a small hidden area first.