How to Measure Your Shoe Size at Home (UK Guide)
Measure both feet at home, work out your UK shoe size and get the width and fit right first time with this clear step-by-step guide.

In this article
- The short answer
- What you need before you start
- Step by step: measure your foot length
- The trace method, and when it helps
- How to measure width
- Turning your measurements into a UK size
- Check the fit when the shoes arrive
- Measuring children's feet
- Common mistakes and how to fix them
- When to get a professional fitting
The short answer
Your shoe size is a starting point, not a fixed fact. The reliable way to find it is to measure your foot, then compare that measurement with the size chart for the specific shoe you are considering.
Stand on a sheet of paper with your heel against a wall, mark the tip of your longest toe, and measure from the wall edge to the mark in centimetres. Do this for both feet, in the socks you will wear, and use the larger measurement. Then check the brand's own UK size chart, because UK sizes are not applied identically across every shoe or fit.
What you need before you start
- A piece of paper larger than your foot, or a piece of thin card. A4 is often too short for adult feet, so use two sheets taped together or card.
- A pencil or pen
- A ruler or tape measure marked in centimetres and millimetres
- A hard, flat floor and a clear stretch of wall
- The socks you plan to wear with the shoes
- A helper, if possible, to mark accurately while you stand still
If you are measuring a child, have them stand rather than sit. A seated foot spreads differently and can give a misleading length.
Step by step: measure your foot length
Set up the paper
Tape a sheet of paper to a hard floor with one short edge tight against the wall. The paper must not slide when you stand on it. If the sheet is smaller than your foot, use card or two sheets taped together.
Stand with your heel to the wall
Wear the socks you will use with the shoes. Stand tall with your weight evenly on both feet and your heel touching the wall. Keep your foot flat; do not lift your toes or lean back.
Mark the longest toe
With a helper holding the pencil upright, mark the paper at the very tip of your longest toe. Check whether your second toe is longer than your big toe and mark the longest one, not the one you assume is longest.
Measure the distance
Measure from the wall edge of the paper to the mark, in centimetres and millimetres. Write the number down immediately; do not rely on memory. This is your foot length, not your shoe size.
Repeat with the other foot
Measure the second foot in the same way and record it. Most people have one foot slightly larger. Use the larger of the two measurements when you check a size chart.
The trace method, and when it helps
If you cannot get a helper, or you are measuring a child who will not stand still against a wall, trace around the foot instead. Stand on paper, keep weight on the foot, and draw around the outline with the pencil held upright. Then measure from the back of the heel to the tip of the longest toe.
The trace method is less precise because the pencil angle and a moving foot can add or lose a few millimetres, so take two traces and use the larger.
How to measure width
Find the widest part
Stand with your weight on the foot. The widest part is usually across the ball of the foot, at the base of the big toe and little toe. This is where shoes crease and where a tight fit is most obvious.
Wrap the tape
Wrap a soft tape measure around the widest part, keeping it level and snug but not tight. Do not pull it into the skin. Record the measurement in centimetres or millimetres.
Check both feet and the chart
Measure the other foot and use the wider measurement. Compare it with the width fitting information for that specific shoe. If no width is listed, treat the length as a starting point and expect to try more than one size.
Width fittings are not standardised in the same way as length. Letters and labels vary between brands and even between styles, and some shoes are described only as standard, wide or narrow. A shoe's volume — the space above the foot and around the instep — also affects fit, and you cannot measure that from a flat outline.
Turning your measurements into a UK size
Use the size chart supplied with the specific shoe. Charts usually ask for foot length in centimetres, or give a range for each UK size. Match your larger foot to that chart and treat the result as a trial size, not a guarantee.
UK adult sizes normally run in whole and half sizes, while children's sizes also use whole and half sizes but follow a different scale. Do not convert from a US or EU size in your head unless the chart gives you that conversion; different systems and different brands do not line up neatly. If your measurement falls between two sizes, do not automatically choose the larger one. Consider the shoe style: a laced shoe can be adjusted, while a slip-on or a pointed toe may need more length.
Three ways to measure, and when each one helps
| Method | Best for | What to watch |
|---|---|---|
| Wall and paper | A quick length check at home with a helper | Paper must be taped down and the heel must stay against the wall |
| Trace outline | Wiggly feet and children who cannot stand still | Pencil angle and movement can add or lose a few millimetres |
| In-shop foot gauge | A trained fitter checking length, width and arch position | Still only a starting point; the actual shoe has to fit |
Check the fit when the shoes arrive
- Try shoes on at the end of the day, with the socks you measured in.
- Stand and walk on a hard floor, not just sit and wiggle your toes.
- Check the longest toe: you should be able to move your toes without the foot sliding forward.
- Feel the width at the ball of the foot; the upper should not press hard on either side.
- Check the heel: a little slip as you walk is normal in some styles, but the heel should not lift clear out of the shoe.
- Check the instep and the top of the foot for pressure, especially if you have a high instep.
Measuring children's feet
Children's feet change quickly, and a size that fitted a few months ago may already be too small. Measure both feet while the child stands, in the socks they will wear, and use the larger foot. Check the shoe's own size chart and look at the growing room at the front.
A common guide is about 10 mm of space beyond the longest toe for everyday growing room, but check the fitting advice for the type of shoe and the child's age. Too much space can make the shoe slip and rub; too little can press on the toes. Children do not always complain about a tight shoe, so check the width and the top of the foot as well as the length. Re-measure every few months, and sooner if the child says the shoes feel tight or you can see the toes pressing at the front.
Common mistakes and how to fix them
- Measuring while seated: the foot is not loaded and can measure short. Stand for every measurement.
- Measuring on carpet: the paper sinks and moves. Use a hard floor and tape the paper down.
- Measuring only one foot: feet are often different sizes. Measure both and use the larger.
- Pulling the tape tight for width: this gives a false narrow reading. Keep the tape snug and level.
- Using a shoe's old label as your size: the same UK size can fit differently between brands and styles. Measure your foot again if the fit changes.
- Wearing the wrong socks: thick socks with summer shoes, or bare feet with winter boots, will distort the fit. Match the socks to how you will wear the shoes.
- Relying on a rough outline: a pencil held at an angle can add or lose millimetres. Take two traces and use the larger.
When to get a professional fitting
Get help from a trained shoe fitter if you have very wide or narrow feet, a high instep, one foot noticeably larger than the other, or a child who is hard to measure. A professional fitting using an in-shop foot gauge can check length, width and arch position, but it is still only a starting point: the shoe itself has to fit.
If you wear orthotics or have foot pain, take them with you and ask for advice from a qualified professional. Measuring at home tells you your foot dimensions; it does not diagnose a foot condition or replace a clinical opinion.
Shoe size FAQs
Can I measure my foot without a helper?
Yes. Use the trace method on a hard floor, or push a box against the wall and mark the heel position before you stand. A helper is more accurate because you can stand naturally while someone else marks the longest toe.
Should I measure both feet every time?
Yes, especially if you are checking fit after a long gap or a change in shoes. Most people have one foot larger, and the difference can change over time.
What is the difference between foot length and shoe size?
Foot length is a measurement in centimetres or millimetres. Shoe size is a label a brand assigns to a range of foot lengths, and the same label can cover a slightly different range between brands.
Do UK and EU shoe sizes match?
No. They are different scales, and conversion charts vary. Use your foot length in centimetres and the specific shoe's chart rather than converting from a size you wear in another system.
How often should children's feet be measured?
Every few months is a sensible check, and sooner if the shoes look tight, the child complains, or you can see toes pressing at the front. Children's feet can grow without the old shoes feeling obviously tight.
Should I measure in socks or bare feet?
Measure in the socks you will wear with the shoes. For sandals or shoes you wear barefoot, measure barefoot. The thickness of the sock changes both length and width.